Product Description
A butt weld pipe fitting elbow is a type of pipe elbow that is designed to be welded directly to the pipe, creating a smooth, strong connection. This type of elbow is commonly used in industries such as oil, gas, and petrochemical, where high-pressure and high-temperature conditions require reliable and durable connections. Butt weld pipe fitting elbows come in various angles, such as 90 degrees, 45 degrees, or custom angles, allowing for changes in direction and flow within the piping system. These fittings are typically made of materials such as carbon steel, stainless steel, or other alloys to withstand the conditions of the application.
An eccentric reducer is a type of pipe fitting used to connect pipes of different sizes, typically to reduce the flow of a substance. It is called "eccentric" because the reduction in size occurs off-center, resulting in one side being larger than the other. This design allows for a smooth transition of flow and minimizes turbulence. Eccentric reducers are commonly used in industrial piping systems and are available in various materials
A pipe fitting cap is a type of pipe fitting used to close off the end of a pipe. It is designed to fit over the end of a pipe and is often threaded to provide a secure connection. Pipe fitting caps are commonly used in plumbing and other piping systems to seal off the end of a pipe and prevent the flow of fluids or gas. They come in various materials such as metal, plastic, and rubber, and in different sizes to fit different pipe diameters.
A carbon steel equal tee is a type of pipe fitting that has three outlets of the same size, allowing for the branching of a pipeline into three separate directions. These tees are typically used in various industrial applications to manage and control the flow of fluids and gases within a piping system. The term "equal" signifies that all three outlets are of the same size. Carbon steel is a common material for such fittings due to its durability and resistance to corrosion and high temperatures.
Product Parameters
Norm in alPipe SizeDN |
OutsideDiameterat Bevel |
Center to End |
Center to Center |
Back to Face |
45°Elbows |
90°EIbows |
180°Reture |
H |
F |
P |
K |
Long Radius |
Long Radius |
Short Radius |
Long Radius |
Short Radius |
Long Radius |
Short Radius |
1/2 |
21.3 |
15.7 |
38.1 |
--- |
76.2 |
--- |
47.8 |
--- |
3/4 |
26.7 |
19.1 |
38.1 |
--- |
76.2 |
--- |
50.8 |
--- |
1 |
33.4 |
22.4 |
38.1 |
25.4 |
76.2 |
50.8 |
55.6 |
41.1 |
11/4 |
42.2 |
25.4 |
47.8 |
31.8 |
95.3 |
63.6 |
69.9 |
52.3 |
11/2 |
48.3 |
28.4 |
57.2 |
38.1 |
114.3 |
76.2 |
82.6 |
62.0 |
2 |
60.3 |
35.1 |
76.2 |
50.8 |
152.4 |
101.6 |
106.4 |
81.0 |
21/2 |
73.0 |
44.5 |
95.3 |
63.5 |
190.5 |
127.0 |
131.8 |
100.1 |
3 |
88.9 |
50.8 |
114.3 |
76.2 |
228.6 |
152.4 |
158.8 |
120.7 |
31/2 |
101.6 |
57.2 |
133.4 |
88.9 |
266.7 |
177.8 |
184.2 |
139.7 |
4 |
114.3 |
63.5 |
152.4 |
101.6 |
304.8 |
203.2 |
209.6 |
158.8 |
5 |
141.3 |
79.2 |
190.5 |
127.0 |
381.0 |
254.0 |
261.9 |
196.9 |
6 |
168.3 |
95.3 |
228.6 |
152.4 |
457.2 |
304.8 |
312.7 |
236.5 |
8 |
219.1 |
127.0 |
304.8 |
203.2 |
609.6 |
406.4 |
414.3 |
312.7 |
10 |
273.1 |
158.8 |
381.0 |
254.0 |
762.0 |
508.0 |
517.7 |
390.7 |
12 |
323.9 |
190.5 |
457.2 |
304.8 |
914.4 |
609.6 |
619.3 |
466.9 |
14 |
355.6 |
222.3 |
533.4 |
355.6 |
1066.8 |
711.2 |
711.2 |
533.4 |
16 |
405.4 |
254.0 |
609.6 |
406.4 |
1219.2 |
812.8 |
812.8 |
609.6 |
18 |
457.2 |
285.8 |
685.8 |
457.2 |
1317.6 |
914.4 |
914.4 |
685.8 |
20 |
508.0 |
317.5 |
762.0 |
508.0 |
1524.0 |
1016.0 |
1016.0 |
762.0 |
22 |
558.8 |
342.9 |
838.2 |
558.8 |
1676.4 |
1117.6 |
1117.6 |
838.2 |
24 |
609.6 |
381.0 |
914.4 |
609.6 |
1828.8 |
1219.2 |
1219.2 |
914.4 |
26 |
660.4 |
406.0 |
990.6 |
Note: The long radius elbow in the table is taken from AS ME/ANSI B 16.9, and the short radius head is taken from AS ME/ANSI B 16.28. |
28 |
711.2 |
438.2 |
1066.8 |
30 |
762.0 |
469.9 |
1143.0 |
32 |
812.8 |
501.7 |
1219.2 |
34 |
863.6 |
533.4 |
1295.4 |
36 |
914.4 |
565.2 |
1371.6 |
38 |
965.2 |
599.9 |
1447.8 |
40 |
1016.0 |
632.0 |
1524.0 |
42 |
1066.8 |
660.4 |
1600.2 |
44 |
1117.6 |
695.5 |
1676.4 |
46 |
1168.4 |
726.9 |
1752.6 |
48 |
1219.2 |
758.9 |
1828.8 |
Detailed Photos
Test
Packaging & Shipping
![Stainless Steel Pipe Fitting 90deg Bend Elbow Flange Concentric Eccentric Reducer Equal Unequal Reducing Tee Transition Bend Elbow](//www.micstatic.com/athena/img/transparent.png)
Company Profile
![Stainless Steel Pipe Fitting 90deg Bend Elbow Flange Concentric Eccentric Reducer Equal Unequal Reducing Tee Transition Bend Elbow](//www.micstatic.com/athena/img/transparent.png)
Hebei Cangrun Pipeline Equipment Co.,Ltd specialized in pipe fittings ,flanges and nipples.
Our company has strong technical force. With complete
production equipment, it has more than 120 sets of production equipment, including 8000 tons of four column press, 1600 tons of pushing machine,
800 tons of large pipe bending machine and 8 tons of forging hammer. It can produce valves, flanges, elbows, tees, crosses, reducers, pipe
caps, sockets and other pipe fittings and extension products of all specifications of carbon steel, alloy steel, stainless steel, pipeline steel, low-
temperature steel and other materials according to domestic and international and industrial standards, We adhere to quality first, customer first, is
our purpose.
Certifications
FAQ
1. What about your MOQ ?
MOQ is one piece, we can offer sample for free, customer just pay the transport charge.
2.What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times
become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with
your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do
so.
3.What about payment term ?
You can make the payment to our bank account, Western Union or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.
4. What about package ?
As usual with wooden pallet, wooden case, we can also pack the products as customers' requirement.